CE ISO9001 Medical Film Printer C941M OKI Laser Printer

Medical Dry Film Printer Laser Printer Medical X-ray Film OKI C941M Laser Printer

OKI C941-M takes the advantages of environmental protection to the fullest. After being tested by the "National Office Equipment and Consumables Quality Supervision and Inspection Center", it was reported that the ozone emission of C941-M is only 0.3mg/h (industry standard requirement: ≤3.0mg/h ), basically realizing the print output of environmental protection and no peculiar smell.

Low output cost, high cost performance

When C941-M prints images in the medical industry, the special toner design, compared with other image output devices composed of four-color black, greatly reduces the consumption of the total toner, thus greatly reducing the single image of the medical industry. Page output cost. Similarly, when the C941-M outputs color images, the yellow, magenta, and cyan toners in the printer are consumed relatively little, which greatly reduces the cost of single-page output for color printing.

Ultra-high ease of use, more convenient functional combination

1. C941-M supports custom setting of print media size, the maximum supported size can reach 330mm (width) * 432mm (length).

2. C941-M can be installed in the chamber, and supports up to 5 film slots ※, which greatly improves the convenience of use.

3. 4.3-inch color LCD display: Make the relevant information of the C941-M printer clear at a glance.

4. Replacement of consumables at the front of the printer: The consumables can be quickly replaced from the front of the printer, which greatly reduces the working time delayed by replacing the consumables.

Suitable for self-service cabinet solutions

C941-M is suitable for solutions in the field of self-service cabinets in the medical industry, giving full play to product performance.

About this item:

• Stable and efficient, the perfect equipment for medical image output
  1. It easily and perfectly meets the requirements of image blackness and fineness in the medical industry, while taking into account the color output, greatly improving product stability and high efficiency.
  2. OKI's advanced flat-in and flat-out printout method allows the media to be transported smoothly and achieves an ultra-low card rate.
  3. The printer responds quickly, prints out files quickly, and improves work efficiency as much as possible.
  4. OKI adopts VDC (Variable Pixel Control) LED printing technology, and the pixel size can reach 42.3 μm (600dpi), which makes the image delicate and perfectly displays the image details.
  Equipped with dedicated image output software

Feature:

• 
  Suitable for self-service cabinet solutions

  C941-M is suitable for solutions in the field of self-service cabinets in the medical industry, giving full play to product performance.

Application:

It can be used for medical digital image output, such as: CT,DR, CR ,etc.

Packing & Size:

Service:

• According to the customer's area and traffic conditions, we provide various choices,such as:express, air, automobile, railway, etc.

workshop Coating Line

Exhibition Warehouse

FAQ:

Q1. Which ink should I buy?
A: Please following 3 points to match:

1. The brand and model for printer and printhead.
2. The material which you want to print on.
3. Find us and contact us, and we will check for you.

Q2. I want to buy the inks customized to our printers, similar to the original inks. Is it possible?
A: Our inks can be 100% compatible with the original cartridge.

Q3.I bought some different ink, and I refilled it into my sponge cartridges, but I get brake lines.
A: Our inks are used the imported raw material, super fine particles to make sure printing smoothly and no clogging to the printhead, and strong color reduction to making a sure intense and vibrant color image: PH value close to the original, no harm to the printhead, great lightfastness ability, keep photo reserving time much longer. Great compatibility.

Q4. I just know my application, could you suggest me suitable ink and printer?
A: That's all right! We will follow your application to make some possible solutions and discuss with you to choose the best one.

Q5. I want to test your inks, could I take the sample?
A: It is possible. The sample is free, but the freight is your charge.

Q6.which package do you have?
A:We have packages in 70ml,100ml ,1000ml,500ml,1000ml,5L and 20 L.

Q7.How about the shipment?
A: We can ship it by air or by sea or Express Delivery. For large order quantity, we suggest you ship it by sea.